The Linde HPR-01 Hydraulic Pump is a compact, high performance, oil free diaphragm pump with an integral reservoir. It has been designed for use in industrial and commercial applications where reliability, durability and quiet operation are essential.

The Linde HPR-01 has a single acting, non-reversing flow direction which makes it suitable for pumping clean fluids at pressures up to 1500 bar (20000 psi). The Linde HPR-01 is available in a range of sizes from 0.5 to 2.0 litres per minute (0.2 to 1.3 gpm) flow rate.

The Linde HPR-01 is ideal for use in a wide range of industries including food & beverage, pharmaceuticals, oil & gas, mining and process industries as well as marine and offshore applications.

Learn about our new Linde HPR-01 Hydraulic Pump – a double-acting, pressure-relieving pump with a maximum speed of 400 l/min.

Linde has developed this new pump to meet the increasing demand for high performance units capable of handling high viscosity fluids. The Linde HPR-01 Hydraulic Pump is suitable for use in a wide range of applications including drilling rigs, construction machinery and industrial machinery.

The Linde HPR-01 Hydraulic Pump features two pistons that move simultaneously in opposite directions while maintaining a constant pressure in the hydraulic circuit. This ensures that the oil being pumped always remains at the same level regardless of changes in input pressure or flow rate. This also means that there is no need for a pressure relief valve when using this type of pump – instead, oil can simply be drained from the cylinder if required by opening an appropriate drain valve on the cylinder head

Created by renowned experts at the Linde Hydraulics factory in Aschaffenburg, Germany, the HPR-01 is a high-performance pump that supplies the right amount of flow and control to your hydraulic system.

Linde’s HPR-01 pump has been designed for use in industrial machinery, construction equipment and agricultural machinery. The pumps are available in three different models: Standard Duty, Heavy Duty and Extra Heavy Duty. Each one has its own unique design features and specifications that make it ideal for specific applications.

The Standard Duty model features a compact frame that allows it to be installed in tight spaces where other pumps might not fit. The Heavy Duty model is suitable for applications where higher pressures are needed (up to 100 bar). The Extra Heavy Duty model is designed for heavy duty applications where high pressure (up to 200 bar) is required along with high flow rates (up to 24 liters per minute).

The HPR-01 is engineered to work with all types of hydraulic circuits which results in increased versatility and productivity.

The HPR-01 is engineered to work with all types of hydraulic circuits which results in increased versatility and productivity. The HPR-01 is a powerful, yet compact and lightweight pump which is ideal for use in construction or agricultural applications. It features a high pressure delivery of 200 bar (2900 psi) at 2.7 lpm (1 gpm) flow rate, so you can use it for many different types of jobs.

The HPR-01 has an integrated check valve to prevent oil from flowing back into the tank when the pump is not running. This helps to reduce maintenance costs because you do not need to drain the tank before shutting down the machine.

One of the benefits of the HPR-01 is its ability to be used in conjunction with closed center systems and open center systems as well as load sensing systems.

The Linde HPR-01 hydraulic pump is a 1.8 horsepower pump that can produce up to 3,000 PSI and 12 GPM. This pump is ideal for use on agricultural equipment, construction equipment, off-road vehicles and other heavy duty applications.

The HPR-01 features a rugged cast iron body and shaft that can withstand high pressures and temperatures. The unit also has a corrosion resistant finish that prevents rusting or corrosion.

The Linde HPR-01 hydraulic pump features a dual stage internal relief valve that allows it to operate at higher pressures without damaging itself or any components connected to it. The unit also has an external relief valve that can be adjusted using an Allen wrench so you can control how much pressure you run through your system at any given time

Additionally, the HPR-01 has been built for heavy duty applications and can be used with both open loop and closed loop control strategies such as load sensing systems or pressure independent flow control. The pump also works well with state of the art electronic control strategies such as CAN bus communication or CANopen bus communication.

The Linde HPR-01 is a high pressure, heavy duty hydraulic pump that has been built for use in a variety of industrial and commercial applications. The pump is capable of delivering up to 1,500 psi at 5 GPM. Additionally, the HPR-01 has been built for heavy duty applications and can be used with both open loop and closed loop control strategies such as load sensing systems or pressure independent flow control. The pump also works well with state of the art electronic control strategies such as CAN bus communication or CANopen bus communication.

The Linde HPR-01 is designed for use with industrial machinery and equipment that require high pressure hydraulic fluid to operate effectively. It can be used with both open loop and closed loop control strategies such as load sensing systems or pressure independent flow control. The pump also works well with state of the art electronic control strategies such as CAN bus communication or CANopen bus communication.

With the Linde HPR-01 Pump, you can achieve high accuracy in pilot applications as well as excellent energy efficiency when working on asphalt paving machines or concrete slipform pavers or mills

The Linde HPR-01 hydraulic pump is an oil-free, high-pressure hydraulic pump. It’s designed to withstand extreme operating conditions and is available in both single- and twin-cylinder models.

For high accuracy in pilot applications, the Linde HPR-01 can be used on asphalt paving machines or concrete slipform pavers or mills. The high pressure output of the Linde HPR-01 can also be used for heavy equipment or equipment requiring high pressures such as tunnel boring machines that use a cutting head with diamond tools.

We hope this article was able to help you have an in-depth understanding of the Linde HPR-01 Hydraulic Pump. If you have any further questions, please feel free to comment on this blog and we will do our best to assist you with your inquiry.